Case study · IBIE · Las Vegas, NV · 2022

The LED Theatre

A seated room built out of four flown LED walls at IBIE 2022 - 356 tiles, a door cut through the screen, and twelve seats each on their own audio feed.

Enclosed LED theatre room on the show floor, screen lit on every wall
Case study
The brief

Some booths need to do more than draw a crowd off the aisle. They need to sit people down, hold their attention, and run a presentation start to finish. For WP Bakery at IBIE 2022, the International Baking Industry Exposition at the Las Vegas Convention Center, the ask was a room on the show floor: enclosed, seated, and made of screen on every side, with its own audio so what played inside stayed inside.

What we built

Four LED walls, flown rather than ground-stacked, closed into a room. 356 P3.9mm tiles in total: two walls at 11 tiles wide and two at 20, each six tiles high, so the room measured roughly 32.8 ft by 18 ft with a 9.8 ft screen height. A double-sided opening cut through one face made the entry, which is why the count lands at 356 instead of 372 - sixteen tiles came out to make the doorway. That is about 9,700 lb of LED in the air, carried on thirty double and two single hanging beams, 260 flat square and 70 rectangular brackets, and 28 ninety-degree corner brackets we fabricated ourselves because the corners of a closed LED room are not an off-the-shelf part. Inside, twelve seats each got their own audio feed, run from two headphone amplifiers through individual cable packages. Two processors and two controllers drove the picture, with a dedicated backup signal system, twenty spare tiles and a spare media server standing by on site.

The result

The room went in and came out on one schedule, with one crew accountable for the structure, the LED, the processing and the audio. Because the corner brackets were fabricated in-house, the geometry of the room was ours to solve rather than something to work around. The backup signal path, the spare tiles and the spare server were specified up front, so a failure in the middle of show hours had somewhere to go.

The details

By the numbers.

  • 356 P3.9mm tiles across four flown walls, closed into a room with a doorway cut through the screen.
  • The 28 ninety-degree corner brackets that make the corners work were fabricated by TLL for this build.
  • Twelve seats, each with an individual audio feed, so the presentation stayed inside the room.
  • A backup signal system, 20 spare tiles and a spare media server were on site for the run of show.
On the floor

A look at the build.

Gear on this show

What we brought.

An immersive seated LED theatre wrapped in screen at a trade-show booth

LED Theatre

Part of this build.

View
Booth with a large LED wall raised above a black structure with a doorway, and a counter in front

LED Walls

Part of this build.

View
A TLL operator at the front-of-house tables with a switcher, a multiviewer and an audio console, facing the main stage

Video Processing & Switching

Part of this build.

View
Custom booth structure wrapped in LED: a flown LED header over LED-clad towers

Booth Structures

Part of this build.

View
More work

Other projects.

LexJet at Printing United LED build
Printing United · Orlando, FL · 2025

LexJet at Printing United

Two LED rings rigged back-to-back, four flown cardinal walls, a floating sphere and an LED counter, all on one synchronized 360° canvas.

Case study
Whirlpool at KBIS LED build
KBIS · Orlando, FL · 2026

Whirlpool at KBIS

Five LED systems for four Whirlpool brands in one booth at KBIS 2026 - 437 tiles across three pixel pitches and three different ways of mounting them, plus audio, network and crew.

Case study
Bombardier at NBAA LED build
NBAA · 2026

Bombardier at NBAA

A U-shaped LED wall of flat and flexible tiles, built around one luxury seat so the picture wraps around the person sitting in it.

Case study
TCL at CES LED build
CES · Las Vegas, NV · 2026

TCL at CES

A 120-foot ultra-wide LED banner over the entrance, a live-production stage, and a monolithic LED column, all playing as one continuous image.

Case study
Taiwan Expo USA LED build
Taiwan Expo USA · Dallas, TX · 2025

Taiwan Expo USA

Main-stage LED wall, lighting, and crew for Taiwan Expo USA at the Kay Bailey Hutchison Convention Center in Dallas, August 14-16, 2025. We came back for the 2026 show.

Case study
Dominican Republic Tourism Showcase LED build
Tourism showcase · Miami, FL · 2025

Dominican Republic Tourism Showcase

An underwater LED environment in Miami: a 3D whale crossing a stage wall and five towers, with a round LED bar in the middle of it.

Case study
Hyundai Santa Fe World Premiere LED build
Hyundai Santa Fe · Santa Fe, NM · 2023

Hyundai Santa Fe World Premiere

Hyundai revealed the fifth-generation Santa Fe in the high desert outside Santa Fe, New Mexico. TLL surveyed the site, built three LED walls across an outdoor terrace and an indoor space, and ran lighting, audio and production live.

Case study
Ready?

Put us on your show.

Drop your show, your dates, and what you need. We'll send the quote.

Get a quote