Moving heads · Wash moving head with zoom

Wash Moving Head, 800W.

A moving-head wash built for covering ground. Use it when you want colour across a wide area rather than a tight beam.

Get a quote All lighting

Power: 800 W
Voltage: AC110-240V 50/60Hz
Light source: 19 x 40W RGBW 4-in-1 LED, individually controlled
Colour temp: 2500K-8000K
DMX channels: 21 / 35 / 78 / 92 / 97 CH
Ingress protection: indoor
Weight: 30.2 lb (weighed by TLL)
Dimensions: 16.9 x 13.4 x 20.9 in (429 x 340 x 531 mm), width x depth x height, measured by TLL
In our inventory: 20 units

Not published yet: beam / zoom. Two manufacturer sources give different figures for this fixture, so we are confirming them against the actual unit rather than printing a number that might be wrong. Ask us and we will measure it.

No manufacturer manual on file for this one. We can still answer anything you need to know about it.

See other lights

More from the lighting stock.

Moving head, beam/spot/wash 3-in-1

Beam / Spot / Wash Moving Head, 371W

A 3-in-1 moving head.

See the fixture

LED moving wash

Wash Moving Head, 710W

A small moving head that punches above its size.

See the fixture

Moving head beam/spot/wash

Beam / Spot / Wash Moving Head, 600W

A beam/spot/wash 3-in-1, separate from our 371W head of the same kind.

See the fixture

See every fixture we carry →

Often booked with

Things that go with it.

LED walls

Lighting is usually pointed at something. Most of our shows put a wall behind the stand.

Truss & rigging

Somewhere to hang it. Ground-supported or rigged, with the hardware to do it safely.

Install & crew

We can bring people who set it up, run it, and take it away at the end of the show.

Lighting

Need the Wash Moving Head, 800W for a show?

Tell us the dates and the venue and we will put it on the schedule.