Moving heads · Moving head, beam/spot/wash 3-in-1
Beam / Spot / Wash Moving Head, 371W.
A 3-in-1 moving head. Beam when you want a hard shaft of light in the air, spot when you want a gobo on a surface, wash when you want the whole stand lit. One fixture, three jobs.
- Light source
- 371 W discharge lamp
- Ingress protection
- indoor
- Weight
- 39.6 lb (weighed by TLL)
- Dimensions
- About 15.6 x 11.4 x 26.0 in (396 x 290 x 660 mm), width x depth x height, measured by TLL
- In our inventory
- 17 units
Specifications
Manufacturer figures.
Not published yet: power, voltage, colour temp, beam / zoom, dmx channels. Two manufacturer sources give different figures for this fixture, so we are confirming them against the actual unit rather than printing a number that might be wrong. Ask us and we will measure it.
See other lights
More from the lighting stock.
Wash moving head with zoom
Wash Moving Head, 800W
A moving-head wash built for covering ground.
See the fixture LED moving wash
Wash Moving Head, 710W
A small moving head that punches above its size.
See the fixture Moving head beam/spot/wash
Beam / Spot / Wash Moving Head, 600W
A beam/spot/wash 3-in-1, separate from our 371W head of the same kind.
See the fixture Often booked with
Things that go with it.
Screens
LED walls
Lighting is usually pointed at something. Most of our shows put a wall behind the stand.
See LED walls Structure
Truss & rigging
Somewhere to hang it. Ground-supported or rigged, with the hardware to do it safely.
See truss Crew
Install & crew
We can bring people who set it up, run it, and take it away at the end of the show.
See crew 
Lighting
Need the Beam / Spot / Wash Moving Head, 371W for a show?
Tell us the dates and the venue and we will put it on the schedule.
Get a quote